loading spinner
Software Update EndoPilot²
  • Software Update EndoPilot²

Software Update EndoPilot² 12-2021

Software Update EndoPilot²

Version v4.204 dated Dec., 2021

The apex-function has been optimized and additional functions have been implemented:

  • The stability of the apex measurement has been increased
  • A trend-graph, displaying the movement in the canal has been integrated. The trend-graph can be switched on by the service code "20161". Resp. the service code "20160" will switch it off.
  • ......

see description for further information

 

Software Update EndoPilot²

Version v4.204 dated Dec., 2021

The apex-function has been optimized and additional functions have been implemented:

  • The stability of the apex measurement has been increased
  • A trend-graph, displaying the movement in the canal has been integrated. The trend-graph can be switched on by the service code "20161". Resp. the service code "20160" will switch it off.
  • The number of apex-measurement cycles has been increased up to 200 times per second.
  • The measurement quality, via the EndoPlot contra-angle handpiece, will be analysed now. The devices detects any intermittency while the motor is running.
  • If the apex signal is interrupted too often, a "!" is displayed on the screen.
  • If significant EMC is detected (for example from other devices), which could affect the apex-measurement, the warning:  "EMC !" is displayed on the screen.
  • The stopping of the motor has been optimized: If the motor starts already at the apex-position, the start is performed without any delay.
  • D-Pack beeped very loud after heating the BackFill gun, this is now prevented.
  • Obturation menu: A dot in the display makes it easier to read the selected temperature
  • Optimization of the Bluetooth connection for foot-switch dated from 11-2021

New
110 2110

Specific References

Download

Anleitung Update EDP², deutsch

Download (342.33KB)

Update instructions EndoPilot²

How to update the EndoPilot²

Download (261.55KB)

16 other products in the same category:

EndoPilot² ultra plus

EndoPilot² ultra plus:consist of:Control Unit:  110 2010 EndoPilot² control unit with 7" touch-screen 110 2203 AC /DC adapter for EndoPilot² 109 2361 Wireless-footswitch, single, bluetooth 109 2311 Apex cable 110 2303 Retainer for apex cable...

Quick view More info
EndoPilot² comfort

EndoPilot² comfort

EndoPilot² comfort consist of:Control Unit:  110 2010 EndoPilot² , touch-screen,  Display: 7" TFT 110 2203 AC /DC Adapter for EndoPilot² 109 2361 Wireless-Footswitch, single, bluetooth 109 2311 Apex-cable-set 110 2303 Retainer for apex-cable...

Quick view More info

Bone-mill KM-3

Bone-mill KM-3cylinder-Ø 20 mm  Material: Steel+  polished cylinder+  vacuum solidified cuts+  vacuum solidified casing+  special "easy cut" cylinder incl. "Spezial Oil Spray"

Quick view More info

DownPack handpiece

Obturationsmodul D-Pack™ für EndoPilot With the DownPack-module, an obturate, threedimensional filling of the apical third is achieved. With the help of the warm, vertical condensation technique, highly efficient, safe and homogeneous root canal...

Quick view More info